Ring Type Protective Current Transformers
KRP SERIES
- Ratio Range :50/5 or 1A to 5000/5 or 1A
- Standard Accuracy Class : Standard – 5P, 10P, 15P, Special – PS and XPS
DOWNLOAD THE CATALOGUE
KRP Series are a range of Protective Current Transformers. This series of Ring type, also called as window type, allow bus bars or cables to be passed through the CT and act as a Primary for the CT. These CTs are used to activate the protective relay in case of a fault current and isolate a part of or the full system from the main supply. Apart from the standard ranges, we can design and manufacture for your specific requirements. Please feel free to get in touch with us if you need something that’s not listed here.
- Can be manufactured to IS-16227, IEC-61869 or C-57.
- Wide range of transformer ratios available.
- High accuracy class available.
- Dual Ratios can be given.
- Available as PVC tape insulated, Varnished fiber glass tape insulated, Resin cast or Molded Case (ABS or Glass Filled Nylon).
- System Voltage: 0.66KV/0.72KV
- Rated Secondary Current: 5A or 1A
- Dielectric withstand Voltage: 3KV for 1 minute
- Operating Frequency: 50Hz/60Hz
- Overload withstand current: 1.2 x rated current continuously
- Class of Insulation: A – For Tape Wound & Molded Case B – For Resin Cast
- Standard Ambient Conditions: 5°C to +45°C
- Altitude: Up to 1000mtrs above mean sea level
- Primary Current: 50A to 5000A
- Secondary Current: 1A, 5A or as per customer requirement
- Accuracy Limit factor (ALF): 5, 10, 15, 20 & 30
- Output (Burden): 1 VA to 30 VA
